Installing Your Do It Yourself Stair Lift

There are a number of people who find themselves unable to walk up and down the stairs inside of their home. These people are either handicapped and cannot physically walk on their feet or they're so weak that they can't safely walk up and down the stair way. Anyway they require something that is going to make this small feat possible. That is why they have the assistance of an DIY stair lift.

The DIY models will probably be one of the best models for anyone to acquire when you do not want to spend a whole lot of money. The unit is already likely to cost a bit of of money so you need to have the ability to save money which you would otherwise pay on hiring somebody to come out and install it for you.

When the unit arrives you will need to lower the track onto the stairs and attach the brackets on the steps using the required screws that came with it. Ensure you lay it down beside the wall and not the stair well. Next you need to install the box wiring.

This cord has to run along the track and up towards the top of your stairs in the box. Ensure it's in a place where no one may be tripping over it when it's installed. After that's finished you will be ready to lay down the upper track. This could slide right into place and than screw it to lock it.

Put the track onto the Bruno stair lift. This really is what is going to pull the chair in the direction that it will have to go in. Pull the power cable of your seat along the slot on the track and the chair will move easily. After that attach the seat on the track and secure it using the necessary screws. Plug in the primary power source and you shall be able to go.